S1 - Mechatronic punching machine
- MM
- INCHES
Machine | S1.30 | S1.40 | ||||
Technical features | ||||||
Maximum lenght of incoming sheet (mm) | 3048 | 4064 | ||||
Maximum width of incoming sheet (mm) | 1524 | |||||
Minimum lenght of incoming sheet (mm) | 370 | |||||
Minimum width of incoming sheet (mm) | 300 | |||||
Minimum thickness of metal sheet (mm) | 0.5 | |||||
Maximum material thickness: | ||||||
Mild Steel (410 N/mm2)(mm) | 5.0 | |||||
Stainless Steel (610 N/mm2)(mm) | 5.0 | |||||
Aluminum (265 N/mm2)(mm) | 5.0 | |||||
Laser | ||||||
Technology | fiber | |||||
Source | fiber | |||||
Maximum power (W) | 2000 - 3000 | |||||
Maximum thickness of sheet (mm) | 5.0 | |||||
Assist gas | Nitrogen, compressed air |
Salvagnini reserves the right to modify this data without warning.
Machine | S1.30 | S1.40 | ||||
Technical features | ||||||
Maximum lenght of incoming sheet (in) | 120 | 160 | ||||
Maximum width of incoming sheet (in) | 60 | |||||
Minimum lenght of incoming sheet (in) | 15 | |||||
Minimum width of incoming sheet (in) | 12 | |||||
Minimum thickness of metal sheet (ga) | 25 | |||||
Maximum material thickness: | ||||||
Mild Steel (410 N/mm2)(ga) | 6 | |||||
Stainless Steel (610 N/mm2)(ga) | 6 | |||||
Aluminum (265 N/mm2)(ga) | 6 | |||||
Laser | ||||||
Technology | fiber | |||||
Source | fiber | |||||
Maximum power (W) | 2000 - 3000 | |||||
Maximum thickness of sheet (ga) | 6 | |||||
Assist gas | Nitrogen, compressed air |
Salvagnini reserves the right to modify this data without warning.